- New
Genesis EAA100 Retro-Fit Protector (Self-Adhesive)
Write your review
| EU | 32 | 34 | 36 | 38 | 40 | 42 | 44 | 46 |
| US | XX5 | XS | S | M | L | XL | XXL | XXL |
| Arm Length | 61 | 61,5 | 62 | 62,5 | 63 | 63,5 | 64 | 64,5 |
| Bust Circumference | 80 | 84 | 88 | 92 | 96 | 101 | 106 | 111 |
| Waist Girth | 61 | 65 | 69 | 73 | 77 | 82 | 87 | 92 |
| Hip Circumference | 87 | 91 | 95 | 99 | 103 | 108 | 113 | 118 |
Brand: Genesis
W x D (mm): 10 x 10
Length (m): 2.5
Colours in this size: EAA100.81 - Matt Silver & EAA100.91 - Bright Silver
Genesis edge protection profiles are designed to absorb and protect against impact damage on external corners on walls. Suitable for retro fixing the profiles provide a decorative and clean finish as well as covering existing damage to walls so the wall covering doesn't have to be replaced.
- Ensure that the surface where the EAA profile is being applied is smooth, dry and free from any contaminants such as loose paint, dust and grease.
- Apply a bead of proprietary cartridge adhesive to the back of both wings on the inside of the profile.
- Carefully place the EAA profile into position and apply an even pressure over the entire surface of the profile until a satisfactory lie is achieved.
- Once the adhesive has set, remove the protective film from the surface of the profile.
Specific References
No customer reviews for the moment.